Pro
Style no. 14361104
Barrier WxB Hood
$50.00 USD
A perfect complement to any of our Barrier WxB jackets, the Barrier WxB Hood layers comfortably underneath a helmet to seal out the elements.
•Barrier WxB 3–layer fabric for superior waterproof breathable protection
•Waterproof, fully taped internal seams
•Adjustable front hook and loop closure
•One hand pull elastic draw cord at rear
•Reflective elements for low–light visibility
•Compatible with all two–snap hood attachments on Pearl Izumi WxB jackets from Fall 2006 onward
ONE SIZE
50% polyester 32% polyurethane 18% nylon
Use simple detergents with no additives:
Never use detergents with fabric softeners, perfumes or any additive type product. The general rule of thumb is the simpler the better. Many detergents with additives leave "surfactants" behind on a fabric's fibers that inhibit the technical performance. Typically the best detergents to use will have "Clear" or "Free" in their names. Don't pour the detergent directly onto the clothing, put it in the washer first, when you start the water. If something is not functionally working, but is not dirty, try rinsing it twice in warm to hot water. This will help get rid of the harmful surfactants.
Read the care content label:
On the inside of your garment, or on the hangcard, there are instructions for the care of that individual piece. On garments this will be on a side seam or back seam label. Follow those directions. On finer fabrics, use a "Gentle" cycle. Close all zippers, attach "hook and loop" closures on gloves
You can use the dryer, carefully:
If you use a dryer be sure to use a lower / warm heat setting (Do NOT use a commercial dryer or a "Hot" setting). This will often restore the fabric and help the water and wind repellent qualities. If in doubt, hang the clothing to dry.
Never use detergents with fabric softeners, perfumes or any additive type product. The general rule of thumb is the simpler the better. Many detergents with additives leave "surfactants" behind on a fabric's fibers that inhibit the technical performance. Typically the best detergents to use will have "Clear" or "Free" in their names. Don't pour the detergent directly onto the clothing, put it in the washer first, when you start the water. If something is not functionally working, but is not dirty, try rinsing it twice in warm to hot water. This will help get rid of the harmful surfactants.
Read the care content label:
On the inside of your garment, or on the hangcard, there are instructions for the care of that individual piece. On garments this will be on a side seam or back seam label. Follow those directions. On finer fabrics, use a "Gentle" cycle. Close all zippers, attach "hook and loop" closures on gloves
You can use the dryer, carefully:
If you use a dryer be sure to use a lower / warm heat setting (Do NOT use a commercial dryer or a "Hot" setting). This will often restore the fabric and help the water and wind repellent qualities. If in doubt, hang the clothing to dry.
ADDITIONAL IMAGES
AVAILABLE COLORS (1)
