•SELECT Barrier WxB 2.5 Layer fabric sets the benchmark in waterproof-breathable protection
•Waterproof fully taped internal seams
•Waterproof main zipper
•Detachable hood with rain gutter
•Two hand warmer pockets and one rear pocket
•Asymmetrical cuffs interface with gloves to create a seal
•One hand-pull elastic draw cord at waist with welded reinforced exit point
•Reflective elements for low-light visibility
Recommended for temperatures between 38˚F and 52˚F
Body: 55% polyurethane/ 45% polyester
Weight: 128 g/m2,10,000mm waterproof/3,000mm g/m2/24-hour breathability
Never use detergents with fabric softeners, perfumes or any additive type product. The general rule of thumb is the simpler the better. Many detergents with additives leave "surfactants" behind on a fabric's fibers that inhibit the technical performance. Typically the best detergents to use will have "Clear" or "Free" in their names. Don't pour the detergent directly onto the clothing, put it in the washer first, when you start the water. If something is not functionally working, but is not dirty, try rinsing it twice in warm to hot water. This will help get rid of the harmful surfactants.
Read the care content label:
On the inside of your garment, or on the hangcard, there are instructions for the care of that individual piece. On garments this will be on a side seam or back seam label. Follow those directions. On finer fabrics, use a "Gentle" cycle. Close all zippers, attach "hook and loop" closures on gloves
You can use the dryer, carefully:
If you use a dryer be sure to use a lower / warm heat setting (Do NOT use a commercial dryer or a "Hot" setting). This will often restore the fabric and help the water and wind repellent qualities. If in doubt, hang the clothing to dry.