• SELECT Transfer fabric sets the benchmark for moisture transfer
• Full length zipper for venting
• Elasticized gripper on back to keep hem in place
• Three back pockets
• Reflective elements for low-light visibility
• Sublimated graphics on selected panels
Recommended for temperatures between 50˚F and 70˚F
Body: 100% polyester/ UPF 50+
Weight: 142 g/m2
Sleeves: 82% polyester 18% spandex
Never use detergents with fabric softeners, perfumes or any additive type product. The general rule of thumb is the simpler the better. Many detergents with additives leave "surfactants" behind on a fabric's fibers that inhibit the technical performance. Typically the best detergents to use will have "Clear" or "Free" in their names. Don't pour the detergent directly onto the clothing, put it in the washer first, when you start the water. If something is not functionally working, but is not dirty, try rinsing it twice in warm to hot water. This will help get rid of the harmful surfactants.
Read the care content label:
On the inside of your garment, or on the hangcard, there are instructions for the care of that individual piece. On garments this will be on a side seam or back seam label. Follow those directions. On finer fabrics, use a "Gentle" cycle. Close all zippers, attach "hook and loop" closures on gloves
You can use the dryer, carefully:
If you use a dryer be sure to use a lower / warm heat setting (Do NOT use a commercial dryer or a "Hot" setting). This will often restore the fabric and help the water and wind repellent qualities. If in doubt, hang the clothing to dry.