When frost-covered leaves litter the ground but the singletrack beckons, reach for the Canyon ECOLoft™ Jacket. This thoughtfully designed jacket will keep you warm without overheating when the intensity picks up. We use sustainable and highly-breathable ECOLoft™ ActiVe insulation to quickly transfer excess heat, providing consistent warmth, so you can keep riding instead of adjusting layers. A two-way zipper makes it easy to quickly dump heat from a climb even if you’re wearing a pack. And should things get damp, our PI Dry® technology shrugs off mist and tire spray leaving you free to focus on the trail ahead.
The Summit Pro Barrier Jacket is your insurance policy against inclement weather. It's so light and packable that it can go with you on every ride, but unlike other emergency jackets, this one is actually comfortable to wear while riding hard. The stretch-woven fabric is focused on breathability, with tuned air permeability to avoid clammy sweat buildup. A DWR treatment repels moisture well enough to shrug off an afternoon shower. When not in use, the Summit Pro Barrier Jacket packs down into its zippered rear pocket for easy storage. This just-in-case jacket features a hidden strap that allows it to be secured to your bike so you're always prepared and ready to go.
Make any wet day a great day to ride with this inclement weather Summit WxB Shell Short, engineered for performance as much as protection. Bonded and taped seams hold the highly breathable ELITE WxB waterproof fabric together to keep you dry throughout your entire ride. Constructed with a lighter weight 2.5-layer fabric on the front and main body of the short for exceptional breathability, and 3-layer WxB fabric for increased durability where the short meets the saddle. The elastic free waistband adds comfort, and security, for a reliable fit that is easily customized on the fly with external hook and loop adjusters. New Trail Access side pockets are angled backwards, instead of down the front of the thigh, to shift contents comfortably out of the way while pedaling and allow easy accessibility while in the saddle. A longer inseam paired with scalloped leg openings maximizes front protection, while minimizing calf contact during pedaling, and easily integrates with pads. Wear over your favorite Liner short.
Chilly days chasing singletrack are better with the right layers. The Canyon Alpha Top blends the cozy warmth of a shirt jacket with the durability of your trusty flannel into one performance-minded piece that's at home on the trail, the campsite, and your favorite brewery. Polartec Alpha® insulation provides surprising warmth without adding bulk and wicks moisture quickly to maintain comfort; perfect for the dynamic efforts of trail riding. A zippered chest pocket keeps your essentials secure and snap closures add a casual vibe to help blend in off the bike.
Cooler months can put a lot of demand on your gear closet, so the Summit Thermal Jersey is designed with versatility in mind. Wear it as a warm-yet-breathable outer-layer during fall and spring rides and use it as your insulating mid-layer when the mercury plummets during the winter. The technical fleece is constructed with a grid fabric that allows it to quickly transfer moisture while retaining heat to keep you focused on the ride, not the thermometer. The Summit Thermal Jersey features two zippered hand pockets, a zippered chest pocket, and a hood that's slim enough to fit under a helmet for really chilly rides.
Go hit the trail with a fun print and a relaxed vibe with the Summit Button-Up, but not at the expense of technical performance. This shirt is constructed from highly breathable Transfer Mesh fabric to keep you cooler, dryer and comfortable in the heat. Mountain bike-friendly features include shoulder seams strategically positioned for comfort when wearing a hydration pack, and stretch-woven polyester sleeves to improve airflow. GoFresh™ tech fights the funk and allows you to relax post ride without smelling like you just crushed 20 miles.
We boosted the capabilities of the traditional soft shell jacket with a super-breathable membrane and additional insulation, for an ideal cold-weather riding jacket. Our Barrier fabric (100% recycled polyester with a DWR finish) blocks wind and moisture. For insulation, we used 100g Primaloft Gold insulation with Crosscore technology, which provides a surprising level of warmth without excess weight or bulk. Insulation is concentrated on the front of the chest and upper arms for warmth in core areas while still allowing for breathability while riding.
Blending the down-to-earth look of a hoody with recycled polyester fabric and HeiQ (say “Hi-Q”) Fresh anti-odor technology, this piece is ready to ride and prevents odor from lingering after. The HeiQ treatment is not only a green way to minimize odor, it will reduce the need to wash the garment after every ride, which is a powerful way to reduce our environmental impact. Two zippered hand pockets let this hoody double as a lifestyle piece with all the performance of serious trail gear.
This versatile take on the classic snap front shirt is insulated for cold weather riding and made from a thermal rayon and recycled polyester blend. We add 60g Polartec Alpha Direct (an incredibly soft, 100% recycled polyester insulation) against the chest because it does an excellent job of trapping warm air against the body while also offering superior moisture transfer. Cordura stretch fabric elbow patches and front pockets add style as well as durability.
This top gives the look and fit of a long-sleeve T-shirt, with all the function of a technical jersey, for a little extra protection from the sun and local flora. Raglan sleeves provide a great on-body feel, and allow for an easy reach to the bar. The highly breathable mesh is made from recycled polyester, to wick moisture for a stay-dry feel even on hot days.
This top gives the look and fit of a T-shirt, with all the function of a technical jersey. Raglan sleeves provide a great on-body feel, and allow for an easy reach to the bar. The highly breathable mesh is made from recycled polyester, to wick moisture for a stay-dry feel even on hot days.
These mountain bike pants will keep you cranking through the dark days of winter. The Summit AmFIB® Lite Pant combines lightweight softshell fabric on the front for wind and water protection, with thermal fabric on the back for the perfect balance of warmth and breathability. Our PI Dry®® technology adds water-shedding performance so you'll stay drier when charging through puddles or kicking up snow. Trail Access pockets are strategically positioned to store your phone or energy bars behind your legs for pedaling comfort. Wear these pants over your favorite Liner shorts, or wear them over cycling tights for additional warmth on the coldest days.
When you go by bike, some rides call for just a bit of cushion without the bulk of a standard cycling short. That' where the Minimal Liner Short comes in. Think of it as an upgraded pair of boxer briefs with our slim and breathable Versa chamois. This is your go-to liner for hot laps on your favorite trail, a day of lift access shredding, or your daily commute.
The Journey has the fit and performance necessary for mountain biking, with the crossover look ready to go with you on all active endeavors. This do-it-all short is constructed from recycled nylon with four-way stretch allowing it to perfectly match your movement. Underneath, a floating liner short provides compression and stay-dry performance, with the comfortable support of our breathable SELECT chamois. This is your go-to short when your active lifestyle includes cycling and more.
This is the pant for when you’ve got to be out there, no matter the conditions. Improved water-resistant and windproof AmFIB® fabric is surprisingly soft and features four-way stretch to allow an unrestricted pedal stroke. Our permanent PI Dry®® water-shedding technology adds another level of weatherproofing that will last the life of the pant. We employ Thermal fleece panels treated with PI Dry® behind the knees for pedaling comfort and temperature regulation. This is the pant for freezing temps; it’s our warmest bottom.
Whether you’re defending against cool temps or itchy bushes, this full-length pant is ready for the trail. We use 4-way stretch Cordura to make the pants tough enough for serious trail riding without restricting pedaling. A tapered leg keeps you out of the chain, but still has room for knee pads. Finished with PI Dry®® permanent water-shedding technology, these pants are up for splashy conditions or light rain. While perfect for cooler conditions, this pant can be comfortable into the 70s.
This short blends all-day function and comfort with the durability to shrug off tumbles. We cut it from 4-way stretch Cordura®, so that it moves with you while providing extra abrasion resistance. Simple and secure waist straps provide quick adjustability, and a belt-like waist band will keep these shorts reliably in place as you sit and stand. Our PI Dry®® technology sheds water and mud when things get nasty to keep you drier and more comfortable.
Today’s mountain bikes are lighter, more capable, and use more sophisticated technology than ever before. These shorts are our answer. We’ve combined a tailored fit with premium materials and innovative details. Lightweight 4-way stretch Cordura® held together by bonded seams provides next-level durability without restricting movement, and PI Dry®® technology keeps you drier when things get splashy. Adjusting the fit on the fly is possible using a BOA dial for instantaneous changes. The premium liner is designed to slip smoothly against the shell and features our Elite-level chamois for long-ride comfort.
Engineered to deliver friction free pedaling, performance, and phenomenal breathability. This superior men’s Liner short is a must have for serious trail riders. Smooth fabric on the front of the thighs allows the liner to slide easily beneath your shell shorts and the Transfer Mesh main body delivers unbelievable breathability. Thigh pockets near the leg openings can conveniently stash your food, ID, money, or tools. And they are easy to access by flipping up the bottom of your shell short. The superior ELITE Escape 1:1® Chamois takes your saddle comfort to a whole new level.
Many experienced riders have opted for the comfort of road bibs under shell shorts for years. They prefer the feel of a bib, but Road shorts are not made to be covered with a durable shell short, and the combination can be warmer than ideal. Enter our Cargo Bib Liner short, which not only improves ventilation versus traditional Road shorts, but also adds integrated storage with three rear jersey-type pockets and two lower pockets on the thigh for trail essentials, like water, tools, and spare tubes. Our superior ELITE Escape 1:1® Chamois takes saddle comfort to a whole new level. With this ultimate bib liner you can ditch your hydration pack for all but your longest rides.
Engineered to be the benchmark lightweight trail short, this liner-free version of our Summit Short will earn its place among your favorite gear. The non-elastic waistband provides a minimalist feel and holds these shorts comfortably in place, while external hook-and-loop straps let you dial in the fit on the fly. New Trail Access side pockets are angled backwards, instead of down the front of the thigh, to shift contents comfortably out of the way while pedaling and allow easy accessibility while riding. We have even bonded and angled the leg openings to prevent snagging on knee pads and to keep the shorts off your calves. The durable water repellant coating sheds trail spray and keeps these shorts looking fresh ride after ride. Add a Liner short of your choice, perhaps our full featured and supremely comfortable Cargo Bib Liner short, to complete the package.
Engineered to be the benchmark of lightweight trail short, the Summit Short, will easily earn its place among your favorite gear. The elastic-free waistband provides a minimalist feel and holds the shorts securely in place, while external hook and loop straps let you dial in the fit on the fly. New Trail Access side pockets are angled backwards, instead of down the front of the thigh, to shift contents comfortably out of the way while pedaling and allow easy accessibility while riding. For added toughness and comfort, we bonded and angled the leg openings to prevent snagging on knee pads and minimize chafing. The durable water repellant coating sheds trail spray and keeps these shorts looking fresh, ride after ride. A new premium liner with a fast drying chamois rounds out this high-performance package.
A casually styled short with trail ready intentions. You will find all the features you want for off-road riding, yet won’t look out of place around town. Two open hand pockets, a zippered cargo pocket, and a rear security pocket store everything you will need on and off the bike. The new premium chamois liner adds extra in-the-saddle comfort, and our high-rise rear waistband with internal elastic hook-and-loop adjustments hold the shorts perfectly in place. A durable water repellent finish sheds trail spray and keeps these shorts looking fresh ride after ride.
We have outfitted the Men's SELECT Liner Short with our high quality SELECT Escape 1:1® Chamois so you will no longer have to decide between the comfort of a traditional bike short or the breathability of a liner. The smooth mesh fabric used throughout the liner shorts helps the liner move smoothly under your shell layer for unrestricted pedaling.
This midweight pullover uses recycled polyester fleece to lend loft, warmth and wicking performance to a classic style. An anti-odor treatment keeps it smelling fresh even after an extended ride; more important, you’ll be able to wear this garment more between washes, thereby cutting down on its environmental impact. Design elements like the ribbed cuff and collar add a touch of style that will make this a cool weather favorite.
This shirt has the look and supple feel of a classic flannel, but it’s made with a high-quality recycled polyester. For life on two wheels, it incorporates a pleated design at the shoulder to give added mobility and an easy reach to the handlebar. From early morning commutes to late nights by the fire, this piece covers your every adventure.
Simply put, the X-Alp Elevate is a mountain bike shoe for mountain biking. It’s not focused on power transfer at the expense of walkability, nor it is a skate-style shoe with cleats attached. Our premier mountain bike shoe is designed for comfort and efficiency on rides that you will describe to your friends as “epic.” We updated the X-Alp Elevate with features that make it lighter, more comfortable, and even more capable of exploring the trails less traveled. All-day rides are as much about efficiency as durability, so we removed weight from the synthetic leather tongue and upper. We kept the tried and true Vibram ECOSTEP outsole with EVA cushioning so you can walk with confidence when the trail gets a bit too techy. Last but certainly not least, we added a second dial to the BOA® Fit System so you can dial in your perfect fit.
If you find yourself digging dirt jumps or railing loose and loamy trails, a bit of extra ankle protection can be a great thing. That’s why we made the Launch Mid WRX. This mid-top flat pedal shoe is constructed on the same platform as the Launch Flat, with added ankle and heel protection and a gusseted tongue to keep out dirt and debris. Because trail conditions can be highly variable, the Launch Mid WRX uses a water-repellent membrane to keep the elements at bay. Laces can be a hassle when covered in mud and grime so the Launch Mid WRX relies on a BOA® Fit System to make fit adjustments a breeze. The rubber experts at Goodyear® developed a compound that is sticky and long-wearing, which we mold into our chevron-shaped PinLoc® tread to keep your feet planted and in control even in slippery conditions.
Our premium gravel shoe blends the lightweight and stiffness of a road shoe with the durability of a mountain bike shoe. The Gravel X™ is ready for your fast gravel adventures with a full carbon sole to maximize power transfer. The glove-like fit of the 3D knit upper combined with the micro-adjustable BOA® Fit System gives the Gravel X™ unrivaled comfort on day-long rides. This knit construction and perforated tongue are breathable, lightweight and quick-drying. We know that gravel grinding can be dirty work, so we wrapped the toe and edges of the Gravel X in a scuff-resistant TPU layer and incorporated a mud-shedding open tread sole design.
A great shoe for gravel riding needs attributes of both road and mountain shoes. Equally at home on gravel, XC trails or all-day adventures. We borrowed technology from our X-Project so that neither walkability or pedaling stiffness suffer. Then cut the upper from a durable 1-piece synthetic leather and added perforations to let feet breathe. A single L6 BOA closure provides equal pressure across the instep. Extra toe protection helps with errant stones and any extended or uphill hikes. A short EVA insert at the heel provides noticeable vibration damping to reduce fatigue on longer rides over rough roads.
The X-Alp Summit is a great shoe for all-day mountain bike adventures. Fully redesigned from the ground-up, the X-Alp Summit shoe receives trickle-down technology from our flagship X-Elevate trail shoe, including a Nylon composite sole that balances pedaling efficiency with walkability and a Grippy Vibram ECOSTEP rubber outsole that will help you navigate the gnarliest hike-a-bike sections. An L6 BOA® Fit System works alongside the Velcro toe strap to provide a comfortable, secure fit. The synthetic leather upper features a plethora of perforations to improve ventilation and allow your feet to dry out after creek crossings. Mountain biking can be rough work, so we reinforced the toe box to ward off rock strikes.
The Flow meets the needs of riders who want a shoe that performs well on the bike and can handle a season of abuse. Wide-set lacing allows a very adjustable fit and a lace lock keeps your shoestrings away from your drivetrain. The secret to this shoe’s success is the grippy performance rubber compound combined with our chevron-shaped PinLoc Outsole™ tread pattern to keep your feet firmly planted and in control.
Lace-up shoes have their place, but if you want a shoe that’s reliably secure and easy to adjust while you ride, reach for the Flow Pop. Or more accurately, reach for the BOA® dial on this shoe. A quick turn lets you dial in your desired fit and get on with what matters most, your ride. The shoe features grippy performance rubber compound combined with our chevron-shaped PinLoc Outsole™ tread pattern to keep your feet firmly planted and in control.
For mountain bikers who ride clipless pedals and want a sleek, street-inspired look, we offer the Launch SPD. This first thing you’ll notice about this revamped shoe is the use of a BOA® Fit System, rather than laces. The switch to a BOA Fit System gives riders the ability to easily adjust the fit while riding, and you’ll never have to worry about snagging a shoelace in your drivetrain. We used Cordura® fabric made from recycled content to construct a brand new upper that is both lightweight and durable. The Launch SPD is built around a ¾ length composite shank that adds stiffness under the cleat for pedaling efficiency while allowing enough flex at the toes for hike-a-bike moments.
Mountain bikers who ride flat pedals deserve shoes with as much advanced technology as those who ride clipless, which is why we developed this flat pedal shoe with a BOA® Fit System to provide unrivaled fit and comfort. The redesigned Launch Flat builds on everything we love about riding flat pedals: freedom of movement, versatility, walkability, and kicks all the downsides to the curb. The Launch uses a lightweight, quick-drying upper, constructed from durable Cordura® fabric made with recycled content. We partnered with the rubber experts at Goodyear® to develop a tread compound that’s both sticky and long-wearing for our PinLoc Outsole™, which is wider for more surface contact and uses a chevron tread design to capture pedal pins, keeping your feet planted and in control.
Extremely versatile, this lace-up cycling shoe makes the easy transition from hike-a-bike sections to pedaling. A composite shank through the midsole connects directly to SPD pedal systems and provides necessary stiffness to prevent foot fatigue while pedaling. Run shoe EVA provides comfortable cushioning off the bike and the recessed cleat design allows for natural walking performance.
Reach for this shoe cover on those cold days when you’re not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers.
Let’s get real; toe covers are a great way to deal with cold weather. They can be pulled over the toe of most cycling shoes and left on for the whole winter, and people do more miles on 45-degree days than they do on 25-degree days (even in Canada).
Use the P.R.O. Barrier WxB MTB Shoe Covers to keep your feet warm and dry in the sloppiest riding conditions. Made for treaded mountain bike shoes, these MTB shoe covers easily slip over your shoes and close with our two stage hook and loop closure.
An essential accessory for any level of rider, these leg warmers transform your shorts into much warmer full-length tights. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But our PI Dry® technology is what really sets these warmers apart, offering permanent water-shedding performance for puddle-charging splash resistance and more warmth in wet conditions. A BioViz® logo on the back of the calf adds reflectivity in low-light conditions.
Transform any pair of cycling shorts into a knicker with these super versatile knee warmers. A general rule is to keep knees covered up to 60 degrees, which means these warmers could see action all year long. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But our PI Dry® technology is what really sets these warmers apart, offering permanent water-shedding performance for more warmth in wet conditions. A BioViz® logo on the back of the calf adds reflectivity in low-light conditions.
Arm warmers are likely the most essential cool weather cycling accessory, and for much of year you won’t leave home without them either on or in your pockets. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But our PI Dry® technology is what really sets these warmers apart, offering permanent water-shedding performance for more warmth in damp conditions. A BioViz logo near the elbow adds reflectivity in low-light conditions.
Our Sun Knees are proven to deliver UPF 50 protection even when the fabric is stretched by 30%, the lightweight material used for these slip-on knee covers will keep you covered and cool so you can lay down the hammer at the height of summer.
More fun in the sun. With increased UPF coverage and better durability, these updated Sun Sleeves give you UPF 50 sun protection, even when stretched by 30%, delivering long-lasting sun protection so you can pedal at the brightest times of day.
With its 19cm cuff height, this is ideal for wearing beneath tights or jeans. We use a comfortable combination of fine Merino wool and technical recycled polyester fibers for temperature regulation, with mesh over the instep to increase ventilation. Nylon in the heel and toe increase durability, and a flat seam in the toe to eliminates unnecessary bulk. As its name suggests, this is our tallest standard weight sock.